Container Load Calculator
Plan how many cartons fit in a 20ft, 40ft or high-cube container, respecting orientation and weight limits, with a 3D loading view.
Loading tool…
This tool provides automated labeling assistance and general information. Requirements vary by product, formulation, market and regulatory status. Verify your final label against current applicable regulations and obtain professional regulatory advice where appropriate before commercial use.
How the loading plan is calculated
The calculator tests every allowed carton orientation. When “keep upright” is on, the height stays vertical and the carton can only rotate on the floor. It then tests splitting the floor into blocks: different orientations along the length, and lanes across the width. For each block:
- columns = ⌊block length ÷ carton length⌋, rows = ⌊block width ÷ carton width⌋
- layers = min(⌊internal height ÷ carton height⌋, maximum stack)
The best arrangement by count is kept, then capped by payload (maximum payload ÷ unit weight) and by the quantity you need to ship. The result shows which limit applied: space, weight or quantity.
The 3D view
Open the 3D view to rotate, zoom and pan the load, switch to top, side or front views, hide the walls, and step through the layers one at a time. Hover over a carton to see its position and size, and download a PNG or a CSV loading plan. The 3D library loads only when you open the view.
Container dimensions
The 20 ft, 40 ft, 40 ft high-cube and 45 ft high-cube presets use typical internal dimensions and payloads. Actual values vary by container owner and build, and road weight limits are often lower than the container payload. Confirm with your carrier or forwarder. The plan assumes rigid, uniform cargo and ignores door clearance, dunnage, carton bulge and axle-load distribution.